Tessonics RSWA, User Manual

Page: 15 / 53

15 15
15 15
Chapter 2 Hardware CPU Unit
9
seal between the screen protector and the display, do not li the screen protector from
the display once it has been applied.
5. Remove the protective plastic cover from the face of the screen protector.
6. Clean any residue remaining on the screen protector by wiping gently with a so cotton
cloth dampened with denatured alcohol. Wipe the screen protector with a so dry cloth
to remove any low-tack adhesive.
2.3.5 Storing
Store the equipment in the Off state with a fully charged external battery installed. e exter-
nal battery always provides power to some system components even when the system is in
the Off state. If the system is stored with the external battery removed, these components are
powered by the system’s internal battery. e internal battery is not designed for extended
use and will discharge in a short period of time; this could result in damage to the internal
battery. You can store the equipment in the Off state for about 30 days with a fully charged
external battery installed. Aer this period, the external battery pack should be recharged
or replaced with a charged external battery.
2.3.6 Using the Hotpad
e Hotpad area consists of several touch screen “keys” on the right side of the system display
that you can use to change several settings. e hotpad allows you to:
• Adjust the display and speaker settings
• Invoke right mouse button
• Invoke hovering capability
• Use as a numeric pad
• Use as a NumLock key
To use a hotpad key, tap directly on it with the pen. You can also press and hold the pen tip
against the Volume and Brightness hotpad keys to automatically repeat the previous hotpad
function. e location of each hotpad key is shown in the table below.