10
4. SKILIFT HARNESS
Description according to figure 5
No.
Comment
1
Polymer ring with an outside diameter of 35 mm, length of 370 mm,
scleroscope hardness of 70 A.
2
Main swivel hook release
– Wichard brand.
3
The swivel means that the release hook mechanism can be turned to
where the skier is.
4
A plastic adjuster enables the opening of the ring to be easily adjusted.
5
Granny knot. A 7mm diameter rope is tied twice at the end of the ring.
6
6 mm diameter link.
7
Opening safety hook
– Wichard brand
When the poles are equipped with a clamp ring instead of the nut
tightening the seat, then this hook can be attached to the clamp ring.
8
Snap hook to attach the rope on the apparatus while the skier is seated.
9
7 mm diameter traction cord.
10
Most of the knots are covered with a sheath.
11
6 mm diameter main release cord. It has a 150 mm long sheath to make
release easier if the ring suddenly turns.
12
An eight knot helps the skier with the cord.
13
6 mm diameter safety release cord. The loop at the end enables the skier
to pass his hands through before grasping the handle of his stabilizer. In
the event of release, the safety snap hook stays next to the apparatus.