www.tesmart.com
3
12
PC 1 Input
DP input A/B:
Connect to the two outputs of the
same computer
USB:
Connect to computer by USB Type A to Type
B cable
13
Auto scan time interval
settings
[MIN]:
Press
[MIN]
to loop between 0~59 minutes
[SEC]:
Press
[SEC]
to loop between 0~59 seconds
[Set]:
After setting minutes and seconds, press
button
[Set]
to enter final scan time interval setting
14
LED display
Display current selected input port
15
Status LED
Red:
Turn off auto scanning mode
Green:
Turn on auto scanning mode
16
IR receiver
Receive IR remote signal
17
Keypad
[1~4]:
Press button[1]~[4] to directly select input
1~4
[Output A]:
Keyboard and mouse focus on the
desktop of output A in the display mode 2
[Output B]:
Keyboard and mouse focus on the
desktop of output B in the display mode 2
[Output A]+[1~4]:
After pressing [Output A], then
press [1~4] to switch input sources of output A
[Output B]+[1~4]:
After pressing [Output B], then
press [1~4] to switch input sources of output B
[Close]:
Press this button to turn on or off the LED
display and monitor
[Scan]:
Press this button to start or stop
automatically scanning between input1 to input8.
The interval time can be set by [Set], [MIN], [SEC]
as described above
18
Power switch
Turn on or turn off power supply
