www.tesmart.com
2
Panel descriptions
ID
Name
Description
1
IR in
Connect IR receiver extension cable to this port, then it is
able to use IR control even if the KV switch is installed in
a rack
2
DC 12V
12V DC power supply
3
RS 232
Connect this port to any control termination, then it is able to
select the input sources by sending RS232 commands
4
USB2.0 port
For USB2.0 devices, for example printers, USB hard disk,
barcode scanner, touch pad,etc
5
HDMI output
port
Connect to HDMI display
6
Keyboard and
mouse input
For USB keyboard and mouse input, including wireless keyboard
and mouse
7
HDMI input
Connect to HDMI sources
8
USB data
Connect to computer by USB Type A to Type B cable
9
Auto
scan
time interval
settings
[MIN]
: Press [MIN] to loop between 0~59 minutes
[SEC]
: Press [SEC] to loop between 0~59 seconds
[Set]
: After setting minutes and seconds, press button [Set] to
enter final scan time interval setting
10
Status LED
Red
: Turn off auto scanning mode
Green
: Turn on auto scanning mode
11
IR receiver
Receive IR signal
12
LED display
Display current selected input port
