E
n
g
li
s
h
E
n
g
li
s
h
This product comes with a TF card and it’s already with in
the device, you can press it to eject the TF card and use a card
reader to see or copy the photos and videos taken by the
endoscope.Please notice that you can only take photos or record
videos when a
TF card is inserted to the device
, otherwise you
can only preview the video stream.
03
~~ ~~
04
~~ ~~
Notices
Long Press
the power button to Power On or Power
Off.Please remove the rubber protective cover before
using this tool.
Please make sure the camera is connected to the
monitor
firmly and tightly
, otherwise there will be
noisy image on the screen.
Please check the battery level if you can not power
on the device or there is noisy image on the screen.
Change Battery
Only when the battery reaches the end of it’s life or its
broken
.
1. Open the cover of the battery
compartment with a screwdriver.
2. Slide the lock tooth to the left.
3.Slide up the cover to open
the battery compartment.
4. Replace the battery with new
one, please notice the poles of
the battery, make sure you place
the battery with correct direction.
Only use 3.7V 18650
Lithium Battery
.
Insert card : Power off the device, open
the cover on the backside of the monitor
and insert the TF card according to this
chart.
1. Please make sure the device is
powered off before operating the TF
card.
2. Please make sure the card is insert
correctly.
3. This device requires Class 10 high
speed TF card and it will not be able
to work properly with Class 4 low
speed card.
