Tesla WD690MW, User Manual

Page: 13 / 198

13
ENG
NOTE
Depending on where your electrical outlet is, you may need to cut a
hole in the opposite cabinet side.
If dishwasher is installed at the corner of the cabinet, there should be some space left for when the door is opened.
Dishwasher installation steps
NOTE
Please refer to the specific installation steps in the installation drawings.
1. Fix the condensation strip under the work surface of cabinet. Please ensure the condensation strip is line with
the edge of the work surface.
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into the cabinet.
6. Level the dishwasher. The rear feet can be adjusted from the front of the dishwasher by turning the Philips
screw in the middle of the base of dishwasher use a Philips screw driver. To adjust the front feet, use a flat
screw driver and turn the front feet until the dishwasher is level.
Electrical, drain
and water supply
line connection
Space between cabinet
bottom and floor
600 mm (for 60 cm model)
450 mm (for 45 cm model)
Dishwasher
Door of
dishwasher
Minimum space
of 50mm
Cabinet