Tesla TSL-HC-A310B, User Manual, Page: 14 / 202

14
3 INSTALLATION, SETUP
AND OPERATION
3.1 OLED display parameter setting
When the device is in the measuring
interface, press the direction button for 1
second in order to enter the menu page
(figure 3.1.1 and figure 3.1.2). There are
two sub-menus.
3.1.1 Reminder Setup
Press the direction button for 1 second
and enter the Reminder Setup. User
can adjust the setting through moving
the “
*
” symbol to the Sound Reminder,
Beep, Restore or Brightness.
• Sound reminder
Press the direction button for 1 second,
move the “
*
” symbol to the “Sound
Reminder”, long press the direction
button to turn the alarm sound on/
off. If the measured value exceeds the
maximum or minimum value of SPO2 or
PR, there will be an alarm sound, if this
function is turned on.
• Beep