Tesla SMART KIT EU-OSK103, User Manual

Page: 4 / 26

4
ENG
USER REGISTRATION
NETWORK CONFIGURATION
• Please ensure your mobile device is connected to Wi-Fi router. Also, the Wireless router has
already connected to Internet before doing user registration and network configuration.
• It is better to log in your email box and active your registration account by clicking link in case you
forget the password. You can log in with the third party accounts.
Cautions
• It is necessary to forget any other around network and make sure the Android or i OS device just
connect to the Wireless network you want to configure.
• Make sure the Android or i OS device Wireless function works well and can be connected back to
your original Wireless network automatically.
Kindly reminder:
User must finish all the steps in 8 minutes after powering on air conditioner, otherwise you need to
power on it again.
Using Android device to do network configuration
1. Make sure your mobile device has already been connect to the Wireless network which you
want to use. Also, you need to forget other irrelevant Wireless network in case it influences your
configuration process.
2. Disconnect the power supply of air conditioner.
3. Connect the power supply of AC, and continuously press the “ LED DISPLAY” or “DO NOT
DISTURB” button seven times in 10 seconds.
4. When the unit displays “AP”, it means that the air conditioner wireless has already entered into
“AP” Mode.
• Some type of air conditioner do not need the step 2 to be in AP.
0
o
1. Click “Sign up 2. Enter your email address and
password, and then click “Registration”