9. Replace the tow eye cover by inserting the
wires into the tow eye opening and
aligning the tow eye cover into position
and turning it into place.
Secure the Tires
The vehicle's tires must be secured onto the
truck using the eight-point tie-down method.
•
Ensure any metal parts on the tie-down
straps do not contact painted surfaces or
the face of the wheels.
•
Do not place tie-down straps over body
panels or through the wheels.
Caution: Attaching tie-down straps to the
chassis, suspension or other parts of the
vehicle's body may cause damage.
If Model 3 Has No Power
If Model 3 has no 12V power, perform the
following steps to open the hood or jump start
the auxiliary 12V battery.
Opening the Hood
1.
Locate an external 12V power supply
(such as a portable jump starter).
2. Release the tow eye cover by pressing
firmly on the top right perimeter of the
cover until it pivots inward, then gently
pulling the raised section toward you.
Note: The tow eye cover is connected to
the vehicle's red positive (+) terminal.
3. Pull the two wires out of the tow eye
opening to expose both terminals.
4. Connect the 12V power supply's red
positive (+) cable to the red positive (+)
terminal.
5. Connect the 12V power supply's black
negative (-) cable to the black negative (-)
terminal.
Note: Applying external 12V power to
these terminals only releases the hood
latches. You cannot charge the 12V
battery using these terminals.
6. Turn on the external power supply (refer
to the manufacturer’s instructions). The
hood latches are immediately released
and you can now open the hood to access
the front trunk area.
7. Disconnect both cables, beginning with
the black negative (-) cable.
8. If pulling Model 3 onto a flatbed truck, do
not replace the tow eye cover yet.
Otherwise, replace the tow eye cover by
inserting the wires into the tow eye
opening and aligning the tow eye cover
into position and turning it into place.
Jump Starting the 12V Battery
Caution: Model 3 cannot be used to jump
start another vehicle. Doing so can result
in damage.
Note: If jump starting Model 3 using another
vehicle, refer to that vehicle manufacturer's
instructions. The following instructions assume
an external 12V power supply (such as a
portable jump starter) is used.
Instructions for Transporters
6
