Tesla RF5200FMA, User Manual

Page: 11 / 142

11
ENG
Cleaning of door tray
• According to the direction arrow in the figure below, use both hands to squeeze the tray, and push it
upward, then you can take it out.
• After washing the tray having been taken out, you can adjust its installing height in accordance with
your requirement.
The picture above is only for reference.
The actual configuration will depend on
the physical product or statement by the
distributor.
Defrosting
Out of operation
• The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function.
Frost formed due to change of season or temperature may also be manually removed by disconnection
of the appliance from power supply or by wiping with a dry towel.
• Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for
several hours; during the power failure, the times of door opening shall be reduced, and no more fresh
food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open
to prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable
holder, freezing chamber drawers and etc. with tape, and tighten the levelling feet; close the doors and
fix them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be
vibrated; the inclination during movement shall be no more than 45°.
The appliance shall run continuously once it is started. Generally, the operation of the appliance
shall not be interrupted;otherwise the service life may be impaired.
The model information and model identification in the product database can be obtained by scanning the
web link on the QR code (if any) on the product energy efficiency label.