Warning: Road holding is seriously
impaired if the tires are incorrectly
installed on the wheels.
Removing and Installing Lug Nut Covers
If your Model X is equipped with lug nut
covers, you must remove them to access the
lug nuts.
To remove a lug nut cover:
1.
Insert the curved part of the lug nut cover
tool (located in your glovebox) into the
hole at the base of the Tesla "T".
2. Maneuver the lug nut cover tool so that it
is fully inserted into the hole in the lug nut
cover.
3. Twist the lug nut cover tool so that the
curved part is touching the middle of the
lug nut cover.
4. Firmly pull the lug nut tool away from the
wheel until the lug nut cover is released.
To install the lug nut cover:
1.
Align the lug nut cover into position.
2. Push firmly on the lug nut cover until it
fully snaps into place.
Tire Care and Maintenance
178
Model X Owner's Manual