Saved Settings
A subset of the settings that you choose from
the Controls window to customize your
Model S are also saved to your driver's profile.
The settings that are associated with driver
profiles may vary depending on the version of
software currently installed on your Model S.
Linking a Driver Profile to a Key
You can link a driver profile to a specific key
to allow Model S to automatically select the
correct driver profile when the linked key is
detected as you approach the vehicle and
open the driver's door. To link a driver profile
to a key, enter Model S with the key and touch
the driver profile icon on the top of the
touchscreen. Select the driver profile you
would like to link to the key, then touch
Link
to Key Fob
.
NOTE:
Model S only detects one key at a
time. The driver profile is linked to the key
that is detected by the vehicle at that time.
Therefore, if you want to link driver profiles to
multiple keys, ensure that only the key that
you would like to link the driver profile to is
within detection range while performing the
linking procedure. Move all other keys outside
of the detection range (at least one meter
away from Model S).
NOTE:
Model S can support up to three linked
keys. However, a driver profile can only be
linked to one key.
To remove the link between a driver profile
and key, touch the driver profile icon on the
top of the touchscreen. Select the driver
profile, then touch the
X
next to
Linked to
Key Fob
.
Valet Mode
When Model S is in Valet mode, the following
restrictions apply:
• Speed is limited to 113 km/h.
• Maximum acceleration and power are
limited.
• Front trunk and glovebox are locked.
• Home and Work locations are not
available in the navigation system.
• Voice commands are disabled.
• Autopilot convenience features are
disabled.
• Most status bar functions are disabled.
• The Mobile Access setting is disabled.
• HomeLink (if applicable in your market
region) is not accessible.
• Driver Profiles are not accessible.
• Wi-Fi and Bluetooth are disabled. When
Model S is in Valet mode, you cannot pair
new Bluetooth devices or view or delete
existing paired devices.
NOTE:
If a Bluetooth paired device or a
known Wi-Fi network is within operating
range (approximately 9 meters) of
Model S in Valet mode, Model S will
connect to it.
Starting Valet Mode
With Model S in Park, touch the driver profile
icon on the top of the touchscreen, then
touch
Valet Mode
.
The first time you enter Valet mode, you will
be prompted to create a 4-digit PIN that you
will use to cancel Valet mode.
When Valet mode is active, the instrument
panel displays the word
Valet
above the
driving speed and the Valet mode driver
profile displays on the touchscreen.
You can also use the mobile app to start and
cancel Valet mode (provided Model S is in
Park). When using the mobile app, you do not
need to enter a PIN because you are already
required to log into the app using your Tesla
Account credentials.
NOTE:
If the
PIN to Drive
setting is enabled
(see
), you must
enter the driving PIN before you can define or
enter a Valet PIN. Once in Valet mode,
Model S can be driven without the valet
needing to enter the driving PIN.
NOTE:
The
PIN to Drive
setting is not
available when Valet mode is active.
If you forget your valet PIN, reset it from
inside Model S by entering your Tesla Account
credentials (which also cancels Valet mode).
You can also reset your PIN using the mobile
app.
Driver Profiles
43
Driving