Smart Summon
(if equipped) is designed to
allow you to move Model S to your location
(using your phone's GPS as a target
destination) or to a location of your choice,
maneuvering around and stopping for objects
as necessary. Smart Summon works with the
Tesla mobile app when your phone is located
within approximately 6 meters of Model S.
Using ultrasonic sensors, cameras, and GPS
data, Smart Summon maneuvers Model S out
of parking spaces and around corners. This is
useful for moving Model S out of a tight
parking spot, through puddles, or helping you
retrieve your car while carrying packages. You
must maintain a clear line of sight between
you and Model S and closely monitor the
vehicle and its surroundings at all times.
CAUTION:
Ensure all cameras and
sensors are clean. Unclean cameras
and sensors, as well as environmental
conditions such as rain and faded lane
markings, can affect Autopilot
performance.
WARNING:
Smart Summon is
designed and intended for use only on
parking lots and driveways located on
private property where the
surrounding area is familiar and
predictable. Do not use Smart
Summon on public roads.
WARNING:
Smart Summon must only
be used on paved surfaces.
WARNING:
Smart Summon is a BETA
feature. You must continually monitor
the vehicle and its surroundings and
stay prepared to take immediate
action at any time. It is the driver's
responsibility to use Smart Summon
safely, responsibly, and as intended.
WARNING:
Smart Summon may not
stop for all objects (especially very
low objects such as some curbs, or
very high objects such as a shelf) and
may not react to all traffic. Smart
Summon does not recognize the
direction of traffic, does not navigate
around empty parking spaces, and
may not anticipate crossing traffic.
WARNING:
Smart Summon's
performance depends on the
ultrasonic sensors, the visibility of the
cameras, and the availability of an
adequate cellular signal and GPS data.
WARNING:
When using Smart
Summon, you must maintain a clear
line of sight between you and Model S
and stay prepared to stop the vehicle
at any time by releasing the button on
the mobile app.
Before Using Smart Summon
• Download the latest version of the Tesla
mobile app to your phone, and ensure
your phone has cellular service and GPS
enabled.
• Your phone must be paired to Model S
over Bluetooth (see
) and located within
approximately 6 meters.
• The vehicle's Autopilot cameras must be
fully calibrated (see
).
• You must have a clear line of sight to
Model S.
• Model S must be in Park, not charging,
and all doors and trunks must be closed.
Using Smart Summon
1. Open the Tesla mobile app, and press
SUMMON
.
2. Press the
Smart Summon
icon located in
the center of the image of your Model S.
It may take several seconds for Smart
Summon to start up.
NOTE:
You can use Standby Mode to
eliminate the delay that occurs when
Smart Summon is starting up (see
).
The mobile app displays a map with a
blue circle, which represents the
maximum proximity of 6 meters that you
must maintain between your phone and
Model S. The blue dot on the map
represents your location, and the red
arrow represents the location of Model S.
3. Position yourself anywhere within the
blue circle where you have a clear line of
sight to Model S.
4. You can now operate Smart Summon
using either of these modes:
Smart Summon
113
Autopilot