Gen 2 Mobile Connector Status Lights
Under normal conditions, when charging is in progress, the Tesla logo lights illuminate
sequentially, and the red light is off. Identify problems by paying attention to these lights.
In some cases, you may need to reset the device by unplugging the Mobile Connector from the
vehicle or from the power outlet.
Green Lights
Red Light
What it means
What to do
All on for 1
second
Off
Start-up sequence.
Nothing. The Mobile
Connector is starting up.
All on
Off
Power on. Mobile Connector is
powered and standing by, but
not charging.
Make sure the Mobile
Connector is plugged into the
vehicle.
Streaming
Off
Charging is in progress.
Nothing. The Mobile
Connector is successfully
charging.
Streaming
1 flash
Charging current is reduced
due to high temperature
detected in the vehicle
connector.
Unplug the Mobile Connector
from the vehicle, and then
plug it back in. Consider
charging in a cooler area, such
as indoors or in the shade. If
the error persists, contact your
closest Service Center
(https://www.tesla.com/
findus).
Streaming
2 flashes
Charging current is reduced
due to high temperature
detected in the input plug that
connects to the Mobile
Connector controller.
Unplug the Mobile Connector
from both the vehicle and the
wall. Ensure that the adapter is
fully inserted, plug the Mobile
Connector into the wall, and
then plug it into the vehicle. If
the error persists, contact your
closest Service Center
findus).
Troubleshooting
Troubleshooting
11
Summary of Contents for MOBILE CONNECTOR - GEN 2
Page 1: ...t t rF GEN 2 MOBILE CONNECTOR OWNER S MANUAL JAPAN...
Page 2: ......
