2
HIGH POWER WALL CONNECTOR INSTALLATION GUIDE
Specifications
The maximum rating for the High Power Wall Connector is 20 kW or 80 amps at 240 volts. Your
vehicle can charge from 200 to 240 volts.
120V ABOVE GROUND
(common in North America)
230V ABOVE GROUND (common
in Europe, Asia, and Australia)
Voltage and
Wiring
240V AC single-phase: L1, L2, and
safety ground
208V AC 3-phase, Wye-connected:
Any 2 phases, and safety ground.
240V AC 3-phase, delta-connected:
With center tap on one leg, use only
the two phases on either side of the
center tap. The two phases must both
measure 120V AC to ground. Do not
use the third leg (208V “stinger”).
230V AC single-phase: LINE,
NEUTRAL, and EARTH.
Current
Maximum 100A circuit breaker.
The maximum current for charging
the vehicle is 80A or 20 kW.
At 240V, this is 19 kW maximum.
Maximum 100A circuit breaker.
The maximum current for charging
the vehicle is 80A or 20 kW.
At 230V, this is 18 kW maximum.
Frequency
60 Hz
50-60 Hz
Cable Length
Approximately 25’ (7.6 m)
Bracket
Dimensions
Height: 15” (382 mm)
Width: 6.22” (158.2 mm)
Depth: 3.7” (96 mm)
Weight
(including
bracket)
20 lbs (9 kg)
Operating
Temperature
-22°F to 113°F
-30°C to 45°C
Storage
Temperature
-58°F to 185°F
-50°C to 85°C
Enclosure Rating
Type 3R
IP 44
Agency
Approvals
UL listed under file number E351001,
FCC Part 15
CE
HPWC_Install_Guide.book Page 2 Wednesday, April 2, 2014 3:30 PM
