Tesla Cyclone Silent PRO BGL400BR, User Manual

Page: 5 / 64

5
1. As in fig.11, you can use the compressed brush in the corner and the aperture.
2. As in fig.12, open the other side with bristles of the compressed brush as the mark of an arrow to clean the sofa, the
curtain and the dust on the ornaments.
3. As in fig.13, tread on the pedal of the brush tool to let the bristles out, and you can clean the floor.
4. As in fig.14 , tread on the pedal of the brush tool again to put the bristles in, and you can clean the carpet.
1. The filter should be cleaned twice a year, and when
there is obvious dirt on the filter, it is time.
2. You must fix the filter properly before running the
vacuum cleaner.
3. The filter can’t be cleaned in the washing machine or
baked by the blower.
4. It will reduce the suction power and damge the motor
if you use the wet filter.
5. Steps for maintenance:
1) As in fig.15, press the outlet lock to open the outlet
board.
2) As in fig.16, get out the outlet filter.
3) As in fig.17, rotate the HEPA cover to separate it
from the chamber cover
4) As in fig.18, get the HEPA cover
5) As in fig.19, If you have any hair winding removable
cleaning.
6) As in fig.20, get the HEPA and wash it.
7) Wash the HEPA cover, the HEPA assembly, the outlet
sponge and the dust chamber in the water without
detergent and dry them before use.
8) Fix the HEPA assembly on the chamber cover and
make sure three salient cubes should be stuck in the
grooves of the dust chamber.
9) Rotate the HEPA assembly in the direction of the
mark on the chamber cover.
10) Assemble the chamber cover assembly and the dust
chamber according to the mark outside.
11) As in fig.20, hit the filter rack with your hand slightly.
12) Put the dust chamber assembly into the machine.
And in this process, first you should make the
chamber in the right position and then press the
handle of the dust chamber, if there is a cluck it
means the operation is successful.
Fig. 9
Fig. 11 Fig. 12 Fig. 13 Fig. 14
Fig. 10
How to use the attachments
MAINTENANCE