Tesla BO300MX, User Manual

Page: 3 / 34

3
ENG
FITTING THE OVEN INTO THE KITCHEN UNIT
IMPORTANT
DECLARATION OF COMPLIANCE
HOW TO USE
PRODUCT DESCRIPTION
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into an
upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame. To
locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, the measurements
and distances adhered to when fixing the oven.
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are
next to the oven must be made of a heat resistant material. Ensure that the glues of units that are made of
veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues that cannot withstand such
temperatures will melt and deform the unit, once the oven has been lodged inside the units, electrical parts
must be completely insulated. This is a legal safety requirement. All guards must be firmly fixed into place so
that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure
an adequate current of air circulates around the oven. The hob must have a rear gap of at least 45 mm.
When you have unpacked the oven, make sure that it has not been damaged
in any way. If you have any doubts at all, do not use it: contact a professionally
qualified person. Keep packing materials such as plastic bags, polystyrene, or
nails out of the reach of children because these are dangerous to children.
• To set functions by turning the function knob to desired level.
• To set the temperature by turning the temperature knob.
• The oven will automatically start cooking after function, time and temperature are set. If the oven is not in
use, always set all the knobs to “ 0 “.
Temperature indicator
Temperature Knob Function Knob