Tesla 50M610BUS, Quick Start Manual

Page: 10 / 100

10
ENG
SPECIFICATIONS
Model 50“ 55“ 65“ 70“
Tuner Type DVB-T/T2/C/S/S2 DVB-T/T2/C/S/S2 DVB-T/T2/C/S/S2 DVB-T/T2/C/S/S2
Brightness 260cd/m² 260cd/m² 260cd/m² 300cd/m²
Power Consumption MAX 138W 168W 198W 230W
Power source 100-240V~50/60Hz
Resolution 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160
VESA 200 x 200 400 x 200 400 x 200 400 x 300
Connectivity HDMI x 3; PC Audio; RF(S2); RF(T2); Headphone; AV; Optical RJ45; USB x 2; CI+
BASIC TROUBLESHOOTING
Problem Solution
Poor picture and sound quality • Try a dierent channel
• Adjust the antenna
• Check all connections
No picture or sound in TV status • Try another channel
• Press the TV/AV button
• Make sure TV is plugged in
• Check the antenna connection
No sound or sound is too low at
maximum volume • Check the volume settings on any external speakers connected to your
television
• Adjust the TV volume accordingly
• Check another channel or input
• Check that MUTE hasn’t been turned on
No colour, wrong colour or tints • Make sure the program itself is broadcast in colour
• Select the picture menu, then adjust the colour and tint submenus
Picture rolls vertically • Check all connections
Blurred or snowy picture, distorted
sound • Check direction, location and connections to your antenna
• Issues may be caused by the use of an indoor antenna (poor signal)
Remote control malfunctions • Replace remote control batteries
• Check battery terminals
• Remote is out of range, move closer to TV
• Remove any obstructions between remote and IR sensor of TV
• Make sure the power cord to your TV is plugged in and turned on
Image is not centred on the screen • Adjust the horizontal and vertical position
“No Signal” on HDMI source • Test the device with a dierent HDMI cable
• Plug the device into another HDMI port
• Try a dierent device connected to the same cable and port
• Perform a factory reset on your TV