Tesla 43S606SUS, Operating Instruction

Page: 16 / 136

16
ENG
Note
1. “SPDIF” may not be available for some regions, your actual TV should govern.
Time
Auto Sync: Includes auto and manual two options.
Clock: Set the time.Only available when Auto Sync option is set to Manual.
Sleep Timer: Set the auto Off time to Off,10, 20, 30, 60, 90, 120, 180 or 240 minutes.
Auto Sleep: TV set auto to standby when there is no signal. Contain On and Off.
Time Zone: Select the time zone.
Summer Time: Select On or Off.
Note: Time Zone and Summer Time may not be available for some models.
Channel
5V Antenna Power
This option is only available in DVB-T source, select On to supply power for the TV’s antenna;
Select Off to turn off this function.
Program Edit
Edit the programs. You can press colored buttons on the remote control to skip programs,
delete programs , and add programs to the favorite list by pressing FAV button.
Signal Information
Showing the information of current DTV channel.
CI Information (Only available in DTV mode)
Enables the user to select from the CAM-provided menu. Select the CI menu based on the
menu PC Card.
Software Update (OAD) (Only for some regions and only available in DVB-T mode)
Select On to allow the TV to update the system software over the air. Select Off will turn off this
function.
OAD Scan (Only for some regions and only available in DVB-T mode)
When software update (OAD) is off, this option is disable. Select OAD scan mean that go to
scan channel to find the OAD update information.
Auto Tuning
Select desired source (DVB-S, DVB-T, DVB-C, ATV) from the source list before starting the auto
tuning.
DVB-S
Satellite Dish Settings (Step 1-3, refer to Fig1)
A set of satellite dish settings must be configured for each wanted satellite before performing
a channel scan.
Satellite: Select the satellite for this TV.
LNB Type: Make sure the LNB type is corresponding to your dish.
LNB Power: Enable or disable the power supply for the LNB.
22KHz: Select the 22KHz to set 22K switch to ON/OFF. The auto mode is used to
switch 22KHz on or off depending on the LNB type.
DiSEqC1.0/1.1: Select the DiSEqC mode for the selected LNB.