Tesla 32T320BH, User Manual

Page: 8 / 54

8
ENG
DVB-T/T2 installation
DVB-C installation
MENU SETTINGS
Menu control (DTV mode)
Picture menu
Press MENU to enter the main menu. Press  to select an item. Press  and OK to select the
submenus. Press MENU to exit the item.
It is recommended to use the default settings.
Terrestrial Setting
Here you only need to press OK to start searching.
All settings are automatically set by country selection you made in first step.
NOTE:
If you have an active antenna, please check the user manual of the antenna for external power supply.
The TV can NOT supply power used for an active antenna.
NOTE: Full scan will have a duration of approximately 20 minutes, depending on your cable network.
NOTE:
Please check the settings for your cable system used by your provider!
Cable Setting
Press  to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search advised)
Scan Mode Choose between Default (recommended), Blind Scan and Network
Channel Type Select Free to search Free-To-Air channels only.
Select Scramble to search Encrypted channels only. All Channels to search FTA
and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
Picture Mode Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and Personal.
Colour Temp Select the overall colour tone of the picture. Available choices are Cold,
Normal and Warm.
Noise Reduction Eliminates noise in the picture. Available choices are:Off, Low, Middle, High and
Default
In the Personal mode, settings can be changed for Brightness, Contrast, Colour, Tint and Sharpness.