Tesla 24MT600BF, User Manual

Page: 2 / 32

2
Please read the following instructions carefully
1. Cleaning the LCD monitor screen: First, make sure the power cord you are using meets the standards for
your region.
• Turn off the LCD monitor and unplug the power cord.
• pray a non-soluble cleaning solution onto a cloth and gently wipe the screen.
• Never spill any liquid directly onto or into the screen or its case.
• Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
• We didn’t responsible for damage caused by the use of any ammonia or alcohol based cleaners.
2. Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause
serious damage to when the device.
3. Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the
display.
4. Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be
performed by an authorized technician.
5. Store the LCD display in a room with a temperature between -20°C - 60°C (-4°F - 140°F). Permanent
damage may result if the LCD display is stored outside of this range.
6. If any of the following situations occur, unplug the monitor immediately and contact an authorized
technician:
• The signal cable between the monitor and the computer is worn or damaged.
• Liquid spills onto the LCD display or the display is exposed to rain.
• The LCD monitor or case is damaged.
1. Unpack the monitor base and place the base on a smooth work surface.
2. Unpack the monitor.
3. Attach the monitor stand arm to the base.
• Make sure the base snaps into the monitor stand arm. (Selected models only)
• Turn the white screw with the included tool or a suitable coin to secure the base to the stand arm
(select models only)
1. Turn off your computer and unplug the power cord.
2. 2-1 Connecting a signal cable (VGA cable)
a. Make sure the monitor and computer are
powered off.
b. Connect the signal cable to the computer’s
graphics card port.
2-2 Connecting a digital cable (Dual input models only)
a. Make sure the monitor and computer are
powered off.
b. Connect one end of the HDMI cable to the back
of the monitor and the other end to the HDMI
port on your computer.
3. Connect the audio cable (only Audio input model)
(optional)
4. Plug the power cord into the power port on the back of
the monitor.
5. Plug the power cords of your computer and monitor
into a nearby electrical outlet.
Important safety instructions
Attaching the monitor base
Connect the monitor to your computer
ENG