14
PA 5740 - Automotive battery simulators
3.4.1.1 Pin count of the control I/O DSub connector
3.4.1.2 CONTROL input specifications
The
V
prog
+
pin of the connector is the voltage Input of the battery simulator.
The output of the battery simulator can be described as U OUTPUT =
V
prog
+
x
GAIN.
The
GAIN
can either be set to 7 or 1.
I
lim
+
is the analog control of the current limit. The input is 1-10 V which equals
a current limit of 1-10 A.
CAUTION! Risk of destruction by wrong voltage!
If the PA 5740 is controlled by any alternative function
generator it care has to be taken that the voltage at the
Ilim+ pin must be at least +1 V.
Make sure the voltage at the Ilim+ pin is at least +1 V.
