Tescom TICF600J, User Manual, Page: 7 / 20

-6-
Insert
Attachment
・
The styling blow-dry brush can be cleaned by removing the brush base from the brush main unit.
Remove from the main unit, and remove dust and hair using a brush.
If dirt builds up, wash with water and dry completely.
Remove the brush base from the
brush main unit while pressing it down.
Reattach using the opposite process from
detaching. Insert the lower part of the
brush base into the brush main unit, and
insert the upper part while pressing down.
Power Source
Product number
AC100-120/200-240V 50/60Hz 1
φ
TICF600J
Power consumption 500W(100/200V) /700W(120/240V)
Power cord length 1.7m
Specifications
Troubleshooting
Possible cause Solution Issue
No air comes out.
(The dryer does not work.)
Another abnormality is present. Immediately stop using the dryer.
Hot or cool air comes out
unintentionally. A spark
appears from the air outlet.
(A spark is caused by the
safety device.)
Always make sure that the air intake is free
from obstruction when using the dryer.
Remove dust and hair.
If there is still a problem, immediately stop
using the dryer.
Air intake is blocked.
Dust or hair is attached to
the air intake.
An incorrect voltage is
used.
Use AC100-120V or 200-240V.
The effect of negative ions tends to be ineffective for those who have: wavy hair, curly hair, fine soft
hair, short hair, hair that was just straightened, or naturally moist hair.
※