Tescom TC-5915AP, User Manual

Page: 36 / 62

28
Shield Box Operation without Fixture
Connecting Sensor Cables
In order for your fixture to work in sensor mode, the sensor connector of Shield Box must be
connected to the control board.
4.4 Shield Box Operation without Fixture
In order to work Shield Box without fixture, the fixture mode must be set to 'Off Mode.'
Refer to 5.6.2.2 Handler & Probe Configuration Commands
If the fixture mode is set to 'Sensor Mode,' sensors will detect nothing and thus the lid will stay open as
if there is a problem..
Also, if it is set to 'Timer Mode,' the lid will take certain time to open and close, hence the operation is
delayed.