Tescom TC-5915AP, User Manual

Page: 45 / 62

RS-232C Commands in Detail
37
It is strongly recommended to use the Dual Hand Mode unless absolutely unnecessary. The
other hand may be trapped if the mode is off.
5.6.2.2 Handler & Probe Configuration Commands
SOLENOID MODE?
HANDLER MODE SENSOR
HANDLER MODE TIMER
HANDLER MODE OFF
PROBE MODE SENSOR
PROBE MODE TIMER
PROBE MODE OFF
SOLENOID MODE?
A query to check the operating mode of Handler & Probe.
Type Query
Input SOLENOID MODE?
Response Handler:<mode>, Probe:<mode>
●
<mode>: {OFF | TIMER | SENSOR }
Example // Below is how to change the Probe Mode from Off to Timer.
SOLENOID MODE?
Handler:OFF, Probe:OFF
PROBE MODE TIMER
OK
It is NOT recommended operating fixture in Timer Mode.
Without sensors, the lid may close even when the fixture motion is incomplete, thus causing
damage to the product or DUT.