Tescom MTP200B, Operating Manual

Page: 57 / 172

MTP200B WLAN Signal Generator Set-up
41
8.2.2 Channel Setting
Input CH_NUM for the reception channel of DUT. See Table 7-1 WLAN 802.11a/g/n Channel Band .
●
Select GEN (M1) → SG → CH_NUM
8.2.3 Power Level Setting
Enter the level of power to be received by DUT. (Tester’s transmit power)
●
Select GEN (M1) → SG → POWER (Enter a value from -5 to -70 dBm)
8.2.4 Path Loss Setting
Input PATH LOSS value. PATH_LOSS is the value of loss from MTP200B’s output port to DUT’s input p
ort. If a user input PATH_LOSS value, MTP200B displays output power value compensating PATH_LOS
S value.
●
Select GEN (M1) → SG → PATH_LOSS
If a user input PATH_LOSS value, MTP200B displays POWER value as [Ptx - PATH_LOSS value].