Tesco WMV510 User Manual Download Page 14

 

The door will be unlocked in approximately two minutes after the
program ends.You can open the door by pulling the handle of the
door towards yourself and take out your clothes.

 

After you unload your clothes leave the door open to dry the interior
of your machine.

  Unplug your machine.
  Close the water tap.

WARNING!

If the power is off end on again after a while on any stage of the washing
program, your machine will continue the program from the point where it was
interrupted. This is not harmful for your machine.

Child lock

Child lock is used in order to protect the washing cycle from the effects of
unwanted button activations during the cycle.Child lock is activated by
pressing the first and third button on the control panel at the same for more
than 3 sec.When child lock is activated,LEDs on the function buttons blink to
indicate that child lock is active.In order to deactive child lock, the same
buttons (1st and 3rd) should be pressed again for more than 3
seconds.Deactivation of child lock is shown by blinking of LED on Start/Pause
button.

SECTION 6: MAINTENANCE AND CLEANING

  Unplug your machine.
  Close the water tap.

WATER INLET FILTERS

On the tap part of your machine’s water inlet hose and at the ends of water
inlet valves, there are filters to prevent entrance of the dirt and foreign
materials in the water to  the machine. If the machine is unable to receive
sufficient water although your water tap is opened, these filters should be
cleaned.

 13

Summary of Contents for WMV510






























Reviews: