
TNET13
CZ
1
EN
1
SAFETY GUIDE
Please read carefully before using this
•
appliance.
Please follow all the precautions listed below
•
for safety and to reduce the risk of injury or
electric shock.
Warning: read all instructions; failure
•
to follow all instructions listed
below may result in electric shock,
or serious personal injury.
This appliance can be used by children
•
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved.
Cleaning and user maintenance shall not be
•
made by children without supervision.
Children should be supervised to ensure that
•
they do not play with the appliance.
Save these instructions
•
Only use the appliance as described in this
•
user guide.
Do not immerse the appliance in water or
•
any other liquid.
Do not allow the appliance to be exposed to
•
rain or moisture during use or storage.
Do not expose the appliance to excessive
•
moisture, dust or dirt.
Always check the appliance for damage
•
prior to use. If any damage is observed, do
not use the appliance.
This appliance is for personal use only. It is
•
not suitable for commercial use.
The appliance is intended for indoor use
•
only.
This appliance has no user serviceable parts.
•
Do not attempt to access the appliance
covers.
Close supervision is necessary if the
•
appliance is operated near children.
Do not use the appliance on children.
•
Never leave the appliance unattended while
•
switched on.
Always switch the appliance off after use.
•
Do not use the appliance if it is not working
•
properly, if it has been dropped or if it has
been immersed in any liquid.
Before using the appliance, ensure that the
•
cutting head is securely fitted.
Never use the appliance on any part of the
•
body other than the hairs of the nose, ears,
sideburns and neckline.
Do not touch the inner blade as it is very
•
sharp.
Always ensure that hands are dry before
•
operating or adjusting any switch on the
product.