TB2T14
EN
5
CRUMB REMOVAL
Your toaster features a crumb tray. This should be emptied
at least once a week to minimise the build up of toast
crumbs and other debris.
To remove the crumb tray: Switch the toaster off at the
mains supply and allow it to cool. The crumb tray is
located at the left side of the toaster. Grip the handle and
slide out the crumb tray. After emptying, replace the tray
before using the toaster.
Toasting Tips
Dry, thin slices will toast quicker than moist, thick
•
slices.
If the toast starts to smoke, press the CANCEL button
•
immediately.
Never put wrapped, buttered, or items with sugar
•
icing into the toaster.
Note: The maximum thickness that your toaster will
accommodate safely in each well is around 2cm, so bear
this in mind if you use unsliced bread. Large rolls, etc.
should not be inserted into the toaster unless they are
sliced first. If you force bread that is too thick into the
toaster, the carriage release may be obstructed causing
a fire risk.
Never remove bread which has jammed in the toasting
wells without first unplugging the toaster from the
mains supply and allowing it to cool. When removing
bread or toast from the toaster be careful not to damage
the carriage mechanism or the heating elements.
Allow the toaster 15-20 seconds to cool down between
toasting operations.
CLEANING THE TOASTER
Unplug the toaster from the mains socket. If the toaster
is hot allow it to cool fully. Wipe the outside with a soft
cloth. If necessary, the body of the toaster may be wiped
clean with a slightly damp (not wet) cloth.
Do not immerse any part of this appliance in water or
other liquid when cleaning and never use any abrasive
cleaners or scourers.
STORAGE
When not in use ensure that the appliance is switched
off at the mains.
Summary of Contents for TB2T14
Page 27: ......
