Assembly Instructions
Oxford 4 Pc Sofa Set
-Chair
3
Make sure the legs remain in contact with the ground.
We recommend the use of furniture covers to protect your
product when not in use.
During bad weather and winter months the product should
be stored in a cool dry place. Before storage ensure that it
is clean and dry.
The frames are manufactured using the powder coated steel
tubing. When steel is exposed to air and moisture it will rust.
Any scratches on the paintwork should be touched up
immediately with metal paint, otherwise corrosion may occur.
To clean metal frame, use a soft cloth moistened in lukewarm
soap and water. Then buff with a dry clean cloth.
Wipe clean with a soft dry cloth.
To clean wipe with a sponge and warm soapy water then
wipe with a dry, clean cloth.
Clean the fabric using warm soapy water only. Do not use
solvent based cleaners or detergents as they can bleach or
damage the product. The product must be thoroughly dried
afterwards to prevent mildew and mould stains from forming.
Most stains can be removed with a mild soap.
Do not use this product if parts are missing, damaged
or worn.
Do not stand on the product.
Never use a pressure hose or washer to clean the product.
Never use scourers, abrasives or chemical cleaners.
Do’s
Warning
Before you start
Dont’s
Produced in China for Tesco Stores Limited.
© Tesco 2014.
Ensure that this product is fully assembled as illustrated
Important:
Retain these instructions for future reference.
before use.
This product should only be used on firm, level ground.
This chair is intended for a maximum weight of 110kg.
Do not exceed this weight.
Do not sit on the arms of this product.
Keep small parts out of reach of children.