OFR1K10 1000W Oil Filled Radiator User Manual
OFR1K10 1000W Oil Filled Radiator User Manual
OFR1K10
User manual
1000W Oil Filled Radiator
CAUTION: Do not touch the main body
of the heater when operating - danger
of burns.
CAUTION: Never hold the heater body
when moving the heater. Always
disconnect the heater before moving
and hold the handle at the top of the
control panel when moving it.
AFTER USE
Turn the power selector switches to the ‘0’
1.
(off) position. Disconnect the plug from the
mains.
When the heater has cooled you can coil the
2.
mains lead around the mains lead storage
reel, pressing the plug into the end of the reel.
Ensure that the lead is coiled loosely with no
kinks, particularly where it exits from under
the reel.
CAUTION: Never use the heater with any
part of the mains lead wound around
the reel. The mains lead must always be
fully unwound when operational.
Allow the heater to cool fully before moving it
3.
to a safe place, away from children and pets.
WARRANTY
Your appliance is covered by a warranty for 12
months from the date of purchase. If a fault
develops during this period, please return the
unit to your nearest Tesco store together with the
original receipt as proof of purchase. This warranty
in no way affects your consumer rights
UK: Waste electrical products /batteries
should not be disposed of with household
waste. Separate disposal facilities exist,
for your nearest facilities.
See www.recycle-more.co.uk or in-store
for details.
ROI: Produced after 13th August 2005.
Waste
electrical
products/batteries
should not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority or
retailer for recycling advice.
OPERATION & CONTROLS
Position the heater in the room, ensuring
1.
there is at least 20cm clearance around the
heater and 1 m above it. Check that the airflow
through the radiator bars is unobstructed.
Set the power selector switches to the ‘0’ (off)
2.
position.
Unwind the mains lead fully, connect the
3.
mains plug to a mains outlet and switch on
the power at the outlet.
Switch on the power selector switches to the
4.
low, medium or high power setting. Use the
low power setting for smaller rooms. Use the
medium or high power setting if the room is
larger or if the temperature in the room is very
cold.
For low power (400 W), press switch I to
•
the I ‘on’ position.
For medium power (600 W), press switch
•
II to the II ‘on’ position.
For high power (1000 W), press both
•
switches to the III ‘both on’ position.
The indicators on the switches will light to
show which switches have been pressed.
Turn the temperature control clockwise to the
5.
maximum position (Max).
The power indicators on the switches you selected
will light and the heater will begin to warm the
room.
When you feel the room temperature is
6.
comfortable, turn the temperature control
anti-clockwise slowly until the power
indicator(s) extinguish.
The thermostat will now switch the heater on and
off to keep the room at this temperature. The light(s)
in the switches will switch off when the thermostat
reaches the temperature you set.
CARE AND MAINTENANCE
Ensure that the appliance has cooled completely
and is disconnected from the mains before
cleaning it.
Use a barely damp cloth to clean the surface of
the appliance. Ensure that no liquids penetrate
the heater casing.
Do not use abrasive chemicals, steel wool. scouring
or abrasive pads on any part of the heater.
Dry thoroughly before re-use or storage.
SPECIFICATIONS
Model: ................................ OFR1K10
Voltage: ............................. 220 - 240 V~, 50 Hz
Power consumption: .... 900 - 1100 W
Net Weight: ...................... 5.4 kg
IMPORTANT: THIS APPLIANCE MUST BE
EARTHED.
Tesco Stores Ltd
Delamare Road, Cheshunt, Herts, EN8 9SL
OFR1K10 V0.3
