11
The bottom line of the display can be switched to show
different items of information that may be transmitted
with an FM station.
To change the display mode
Press the
INFO
button repeatedly to change the
information displayed while playing an FM radio station.
The full range of display options are shown. Some stations
may not broadcast all of these options.
FM SETTINGS MENU
There are also some menu settings that are specific to FM
radio operation. These settings may be changed through
the Settings Menu.
To enter the FM Settings Menu
Set to FM mode.
•
Press the
•
MENU
button.
A map of the menu is shown below. The menu is navigated
in the same way as the DAB settings menu.
FM DISPLAY MODES
MORE DETAIL OF THE FM SETTINGS MENU OPTIONS
Scan Setting:
With this menu option you can set the
scanning sensitivity of the FM radio to two different
levels- ‘Strong stations’ or ‘All stations’. Setting to ‘Strong
stations’ will exclude weaker stations resulting in a quicker
scan. If you set to ‘All stations’ the scan will stop at every
station detected, even if the signal is weak.
Audio Setting:
This option enables you to set the radio
to ‘Forced Mono’ or ‘Stereo Allowed’. Setting Forced Mono
may be useful to reduce background noise when listening
via stereo headphones if the signal is weak and the
broadcast is in stereo.
System:
The System sub-menu options are the same as
those described in the DAB settings section.
FM MENU OPTIONS
RDS Radiotext
Programme type
Frequency
Stereo/Mono
Power mode
Time
Scan setting
Audio setting
System setting
Date
Summary of Contents for DR1551B
Page 1: ...DR1551W DR1551B Userguide...
