6
SELECTING A STATION
PLAYING DAB RADIO
To select DAB radio operation
Press the
•
MODE
button repeatedly to select DAB Radio
mode.
When DAB radio is used for the first time
The system scans all usable stations (full scan) and stores them
alphanumerically -1 Radio, 2 Radio, AA Radio, AB Radio... The
initial scan will take a few minutes and a progress bar will be
displayed with the number of services found.
After the scan, the clock will be set, and the system will begin
playing.
Note: If no stations are found after the scan, it may be that
the signal in your current location is too weak. If this happens,
switch the system off and move it to a location with a stronger
signal. Repeat the scan process in the new location.
The stations found will be stored in an alphanumeric list.
Press the
•
MODE
button repeatedly to select FM Radio
mode.
To auto-tune to FM stations
Press the
•
SCAN
button to tune up the band to the next station.
Press and
•
hold
the
SCAN
button to tune down the band to the
next station.
Tuning will stop automatically when the station is reached.
Mono/Stereo
The radio will automatically receive FM radio broadcasts in stereo
(when available). Alternatively, you can manually set the radio to
receive only in mono. This may be preferred if the signal strength
is low, and the background noise level is high.
To switch between stereo and mono reception, press the
•
MONO/STEREO
button repeatedly.
To manually tune to FM stations
Press the
•
}
or
{
button repeatedly to tune up or down
the band in 50kHz steps.
STATION PRESETS
To select another station
Press the
•
}
or
{
button to browse the list of stations
on the display.
When you find the station name you want to listen to,
•
press
ENTER
.
After a short delay, the radio will re-tune to the station
displayed.
DAB and FM presets
Your radio can store up to 30 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
Tune to the station you want to store as a preset.
•
Press and
•
hold
the
PRESET
button until the preset store
display <Save to P1> shows, flashing.
Press
•
the
PRESET
or button repeatedly until the
preset location you want to store is displayed.
Press the
•
ENTER
button to store the station in this preset
number location.
The display will confirm that the station has been stored in this
preset number.
To recall a preset
Press the
•
PRESET
button.
The display will switch to show Preset 1 station.
Press the
PRESET
or button repeatedly until the preset
you want to play is displayed.
Press the
•
ENTER
button to recall the station in this preset
number location.
After a short delay the radio will re-tune to the selected preset.
FM RADIO
MODE SELECTION
Press the
•
MODE
button repeatedly to step through the
available modes of DAB Radio, FM Radio, CD, AUX and
Bluetooth
audio.
The mode will change.