8
DAB & FM SETTINGS MENUS
DAB SETTINGS
To display the DAB Settings Menu
Set to DAB mode.
•
Press
•
MENU
.
The menu will be displayed at the first option (Full Scan).
Press
•
}
or
{
or turn the rotary control to highlight
each available option in turn.
To choose the highlighted option from the menu, press
•
the
SELECT
button or press the rotary control.
To leave a menu option without making any changes,
•
press
MENU
.
Full Scan:
Select Full Scan to re-scan the entire DAB band
and refresh the station list.
Manual Tune:
Manual tuning enables you to search the band
manually by pressing
}
or
{
to step through the multiplex
numbers and check if any have usable signal strength on a
bargraph display. Manual tuning is not necessary in normal
operation where scanning will have established a station list
of usable stations.
DRC:
DRC is Dynamic Range Compression. Enabling DRC high
or low options may improve the sound of DAB radio when
listening in a noisy room.
Prune:
If your station list includes stations that you can no
longer receive (you may have moved to a different area), you
can select the ‘Prune’ option to remove them and clean up
the Station List.
Software Version:
This option will display the version
number of the control software currently installed in your
radio.
FM SETTINGS
To display the FM Settings Menu
Set to FM mode.
•
Press
•
MENU
.
The menu will be displayed at the first option (Scan setting).
Press
•
}
or
{
or turn the rotary control to highlight
each available option in turn.
To choose the highlighted option from the menu, press
•
the
SELECT
button or press the rotary control.
To leave a menu option without making any changes,
•
press
MENU
.
Scan Setting:
With this menu option you can set the
scanning sensitivity of the FM radio to two different levels-
‘Strong stations’ or ‘All stations’. Setting to ‘Strong stations’
will exclude weaker stations resulting in a quicker scan. If you
set to ‘All stations’ the scan will stop at every station detected,
even if the signal is weak.
Audio Setting:
This option enables you to set the radio to
‘Forced Mono’ or ‘Stereo Allowed’. Setting Forced Mono may
be useful if the signal is weak and the broadcast is noisy
when listening in stereo via headphones.
Software Version:
This option will display the version
number of the control software currently installed in your
radio.
DAB SCANNING
DAB SCANNING
When first used, your audio system scanned the DAB band
for available stations. The station services found were then
stored in your system’s memory.
You can re-scan the band at any time if you move to a different
area or just to refresh the stored list of available stations.
To start a scan from the remote control
Select the DAB band.
•
Press the
•
SCAN
button to start the scan.
The unit will now display the legend ‘Scanning’ and a bargraph
to show scan progress.
The number of services found during the scan will be shown at
the right side of the display.
Number of stations found
Scanning
65
::::::::::::::::
