Tesco CSVC15, User Manual, Page: 4 / 8

CSVC15 User Guide
Wall Mounting the Cleaner
Assembling The Cleaner
The cleaner should be mounted within easy reach of a mains power
point. When mounted the cleaner should be securely hung on the
mounting bracket with the cleaner floor head resting on the floor.
The wall or other mounting surface should be secure and be able to
stand the weight of the appliance plus a small amount of pulling force.
Screws are provided to attach the mounting bracket, but it is your
responsibility to ensure that they are suitable for use with your wall. If
not, you should provide suitable screws and fastening hardware.
If you are in any doubt as to your ability to safely complete this procedure,
consult a suitably qualified technician.
1: Attach the support bracket to the wall.
Mark a line 400mm above the floor.
Centre the bracket mount on this line as shown and
place the bracket with the top edge horizontal.
Using the bracket as a template mark out the three fix-
ing holes. Attach the bracket securely to the wall with
suitable fixings. You may need to drill and plug the wall.
400mm to floor
2: Attach the cleaner to the bracket.
Push the mounting boss of the cleaner
into the bracket mount to securely at-
tach the cleaner.
3: The floor head should rest on
the floor for greater security.
1: Remove the Hand Vacuum from the cradle.
Lay the cleaner cradle flat on a worktop. Press the “Hand Vac” button and
lift out the hand vacuum from the cradle.
2: Attach the Floor Head.
Turn the cleaner on its front. Press the floor head catch in and then insert
the floor head all the way. Release the catch and check the head is secure.
3: Insert the handle.
Turn the cleaner on its back. Push the handle in as far as it will go.
4: Secure the handle.
Turn the cleaner on its front. Remove the attachment screw from its
plastic bag. Screw it firmly into the hole below the handle. Do not over-
tighten.
5: Stand the cradle upright and replace the hand vacuum.
Assembly is now complete
1
2
4
3 5
Page 4