TESA TESA-Rugosurf 20, Instruction Manual

Page: 7 / 24

7
6 GETTING STARTED
Switching on your roughness gauge is done by
toggling the mains switch to the right, and then
pressing down the START/STOP key (1). The
Startup screen disappears a few seconds later.
The gauge unit is then ready to measure and the
results of the measurement lastly carried out are
displayed.
Display switches off automatically when-
ever the gauge is left unused for 60 seconds.
Pressing any key within this short while caus-
es this stand-by condition to increase for 60
additional seconds.
Any menu, submenu or function susceptible to
be directly triggered from the keyboard will not
be accessible unless the gauge is powered up.
Your Rugosurf 20 can also be turned on from
the Rugosoft software.
Note
Turning the toggle switch to OFF then back to
ON will enable you to restart your gauge unit.
If your roughness gauge is left unused for a
long time, we would highly recommend to use
the toggle switch to have it totally powered
down. This way of doing will contribute to pre-
serve the battery.
7 MAIN MENU AND SUBMENUS
Structure
Every menu and submenu lets you control every
operating function.
The main menu appears on the display screen
in the following conditions:
1 Once the gauge has been turned on.
2 When the ENTER -key is pressed down.
Available keys.
Confirming and accessing selected menu.
Moving the scroll key.
Getting back or quitting the menu.