TESA Rugosurf 90 G
4
1 INTRODUCTION
You have purchased the TESA-rugosurf 90G surface roughness gauge and we thank you for this choice. So as to help you to
get the best results from your gauge unit and use it satisfactorily, we advise to first read this manual carefully.
For a safe use over years, we also recommend to take all the necessary precautions as stated hereafter.
Your roughness gauge uses a calibrated stylus mounted at probe end. Therefore, this unit must be handled
with special care. Prevent the unit from shocks. To keep it perfectly clean, use compressed air under a
maximum pressure of 2 bar.
2 SAFETY PRECAUTIONS
1
Make sure the mains power supply matches the conditions of use indicated on the instrument as well as in this manual.
2
Do not attempt to dismantle your gauge unit, except for the parts listed in this manual. If you fail to take this precaution,
you might damage the unit or give rise to faulty working order.
3
Do not subject the probe to stresses or shocks. This feature is a sensitive component, which must be handled with care.
4
Do not use your roughness gauge in a dusty environment or have it exposed to vibrations. Keep it away from appliances
emitting noise on the mains, such as air conditioners, transformers or high-voltage relays.
5
Do not use the gauge unit in places where there may be excessive or sudden temperature variations. Do not leave it in a
closed, overheated room or exposed to direct sunlight.
6
Store your roughness gauge where temperature remains within -10°C to +50°C.
7
Before starting with the measurements, remove any oil spots or dust particles from the surface to be traversed
.
8
Do not drop your roughness gauge. Avoid shocks. Despite it is solidly built, the measuring system inside the unit may be
damaged, thus leading to incorrect measurement results.
3 GENERAL DESCRIPTION
Your TESA-rugosurf 90G is a portable roughness tester having the distinctive properties required for use in a laboratory.
Using it, you will be able to measure roughness parameters according to the following standards:
ISO 4287:1997 - JIS B0601:2001- ASME B46-2002, ISO13565 - JIS B0671, DIN and ISO 12085:1998 - JIS B0631:2000
(MOTIF or CNOMO).-
This microprocessor-controlled tester uses a tactile 3,5" LC Display to show you coloured graphs and let you easily navigate
through the menus. The rechargeable batteries provide full operating autonomy. All menus, submenus and messages can be
displayed in the chosen language English, German, French, Italian, Spanish or Portuguese.
Besides electronics, the main body incorporates a translation unit. A printer is also available as an option. Your tester is
capable to measure with a resolution to thousands.
Summary of Contents for HEXAGON RUGOSURF 90G
Page 21: ...TESA Rugosurf 90 G 20 ...
