11
V. OPERATIONAL GUIDE
A. This meter can be supplied with batteries or 9V Adaptor, If using
batteries :
Remove the rear cover, and install batteries, pay attention to the
polarity of battery socket. If using 9V Adaptor, make sure that it is in
good connection to the Adaptor socket of the meter. Choose the right
temperature probe for your application and insert it into the tempture
probe socket.
B. Press the button to power on the meter. If “
” appears, it
indicates no temperature probe or the probe is broken. To enter test
model before, a version number. After the power is on, before
entering measureing mode, “16” will be shown on LCD.
C. To start the parameter setting, press “
MENU
” button, to stop, press it
again. Press left and right switch (
or
button ) to select the
type of parameter; up and down switch (
or
button ) to
increase or decrease the value of parameters. When modifing
parameters, the symbol will flick.
The parameter in detail sequence:
1. INTERVAL PRINTING STATUS (01/ENABLE, 00/DISABLE):
LCD displays as Fig-5
Fig-5
2. TYPE OF THERMOMETER (K/J/E/T) : LCD displays as Fig-6
Fig-6
