Teryair 59 04 81 Operation And Maintenance Manual Download Page 25

FF-MM-300-REV - 00

Page 25

Operation and Maintenance Guide  Pneumatic Needle Scalers

Warranty Certificate 

 

Every product manufactured by Teryair 

 is built to meet the highest standards of quality. 

Teryair warrants that the Products, accessories and parts manufactured or supplied 

by the company be free from defects in material and workmanship for a period of six 

months from date of Teryair authorized dealer invoice to customer, or one year from 

date of Teryair invoice to dealer, whichever is earlier. Failure due to normal wear, 

misapplication, or abuse is, of course, excluded from this warranty. 

Since the use of Teryair products and parts is beyond our control, Teryair cannot 

guarantee the suitability of any product or part for a particular application and Teryair 

shall not be liable for any consequential damage or expense arising from the use or 

misuse of its products on any application. Teryair does not warranty bought out 

products or components such as electric motors and hardware but will assist in 

directing warranty queries to the dealer/manufacturer responsible. Teryair 

responsibility is limited solely to replacement or repair of defective Teryair products 

or components. 

Dealer/End User shall have no right or remedy and Teryair shall have no liability or obligation under the warranty, if: 

(i) a Product is altered, changed, modified or tampered with in any way, (ii) a Product is damaged after deposit with the

transporter for shipment; (iii) a Product is not properly preserved, packaged, stored, processed or handled after receipt; (iv) a 

Product is not used and maintained in accordance with Teryair's recommended operating and maintenance manuals, 

instructions and procedures, if any; (v) a Product is not properly incorporated or installed in, or not properly combined with, an 

Other Product; (vi) the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises

out of, a failure, substandard performance or other issue with another product, material, component or part not supplied by 

Teryair; (vii) the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises out of, 

compliance with any design, specification or other specific requirement of Dealer/End User; (viii) a Product is used in a manner, 

with a substance or for a purpose other than the normal manner, substance and purpose for which it is intended or is otherwise

subjected to abnormal use or service; (ix) a Product is subjected to a power surge, brown out or other similar occurrence; (x) 

the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises out of, normal wear 

and tear of such Product (including, without limitation, things such as worn seals, diaphragms, balls, O rings, gaskets, chisels,

cutters, hoses and other such wearing components; (xi) the issue with a Product is directly or indirectly. 

Dated 

Product Model Number 

Product Serial Numbar 

   Ajay Bhagat, Q.A. Manager 

  (Company Seal) 

Summary of Contents for 59 04 81



























Reviews: