Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 52 / 204

Setup Confirmation Screen
When you select a task, the Setup Confirmation screen appears and lists the settings for each step of the
task. The name and number of a step is listed at the top of each column of settings, as shown in
Figure 3-8. Table 3-6 describes the buttons that appear on the Setup Confirmation screen. You can
perform a task using the default values, which the system pre-selects for you. If you choose to perform a
task using the default values, you do not need to enter any settings manually; therefore, you can
immediately start the task by touching
Start
.
If you choose to use different settings than the default values, you must enter those settings manually.
Touch
Modify
at the top of the column for the step you want to modify, as shown in Figure 3-8. The
Setup screen appears for that step, as shown in Figure 3-9.
2
5
6
7
3
1
4
Figure 3-8: Setup Confirmation screen
Setup Confirmation Screen
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 3-15