Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 34 / 204

About User Authentication
User authentication allows an administrator to manage the level of access for each user of the Quantum
system. When user authentication is enabled:
•
An administrator assigns a User Role to each user that determines the user's level of access. The
system has two User Roles: Operator and Administrator. See “User Role” on page 2-15 for more
information.
• At least one user is assigned the User Role of Administrator. This user has access to all functions of
the Quantum system, including configuration, and acts as the administrator for the system.
• All users must sign in and out of the system using a user ID and password.
• Only users who are assigned the User Role of Administrator can add a user to or remove a user from
the system.
• Run reports record when a user signs in or out of the system, as well as any tasks that a user
performed or alarms that occurred while that user was signed in to the system.
For instructions on configuring user authentication, see the Quantum Cell Expansion System
Administrator’s Guide.
User Role
The system has two levels of access for users that are called User Roles.
Administrator
This User Role allows a user to:
•
Configure the system, including:
–
Display settings
– System settings
– Default settings for tasks
– Report settings
– Network settings
– Remote alarm settings
• Add or remove users from the system
• Change the User Role assigned to a user
• View reports
• Send reports
• Delete stored run reports
• Perform all tasks
• Clear alarms
• Change his or her own password
• Change the password assigned to another user
Operator
This User Role allows a user to:
About User Authentication
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 2-15