Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 189 / 204

Table 17-3: Physical specifications (continued)
Characteristic Specification
Gas supply requirements
• Connector location: when facing the back of the device, the connector is located on
the back on the bottom
‑
left corner.
• Inlet pressure range: regulated between 40 psi and 60 psi.
Set point pressure is 45 +15/−5 psi.
• Oxygen volume in the gas supplied must not exceed 20%.
• Device includes an external pressure relief valve rated to 75 psi.
– Discharge area: when facing the back of the device, the discharge area is
located on the back on the bottom
‑
left side.
• Internal: 40
‑
micron filter installed.
• Device has a 303
‑
stainless steel, ARO-shape hose coupling plug.
Gas usage
One gas tank with a volume of 6.26 m³ (221 cu. ft.) lasts approximately 30 days under
normal operating conditions.
Touch Screen Specifications
Table 17-4: Touch Screen Specifications
Characteristic Specification
Touch screen display
• Width: 30.5 cm (12 in)
• Height: 22.9 cm (9 in)
• VGA liquid crystal display (LCD)
System Specifications
17-4 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1