Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 187 / 204

System Specifications
This section describes the specifications for the Quantum system.
Environmental Specifications
Table 17-1: Environmental Specifications
Characteristic Specification
Ambient operating temperature 16 °C to 27 °C (60.8 °F to 80.6 °F) at a temperature set point of 37 °C
(98.6 °F)
Degree of protection provided by enclosure IPX0
Altitude Up to 2000 m
Electrical Power and Safety Specifications
Table 17-2: Electrical power and safety specifications
Characteristic Specification
Classifications Class 1 Equipment (Grounded type), per EN 61010
‑
1:2001 (Safety
requirements for electrical equipment for measurement, control, and
laboratory use–Part 1:–General Requirements)
Safety standards
Complies with:
• EN 61010
‑ 1 (Safety requirements for electrical equipment for
measurement, control, and laboratory use–Part 1:–General
Requirements)
• EN 61326 (Electrical equipment for measurement, control, and
laboratory use–EMC requirements)
Input voltage
100 to 240 ± 10% VAC rms, 50/60 Hz
The use of an uninterrupted power supply (UPS) is recommended.
Input power 500 W maximum
Installation over-voltage Category II for transient over-voltages, per EN 61010
‑
1 (Safety
requirements for electrical equipment for measurement, control, and
laboratory use–Part 1:–General Requirements)
Pollution degree 2
Ethernet port Allows service personnel to connect the Quantum system to an
external device for the purpose of transferring data.
System Specifications
17-2 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1