Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 150 / 204

Table 11-8: Step 1 Settings for Add Bag Contents (continued)
Setting Factory Default Setting Options
EC Circulation Rate 30 mL/min 0 to 300 mL/min
Outlet EC Outlet IC Outlet, EC Outlet
Rocker Stationary (0°) In Motion (−180° to 270°, 0 to 3600 sec), Stationary
(−180° to 270°)
Stop Condition Empty Bag N/A
2. Confirm the settings for step 2 shown in Table 11-9.
Table 11-9: Step 2 Settings for Add Bag Contents
Setting Factory Default Setting Options
IC Inlet IC Media IC Media, Wash, EC Media
IC Inlet Rate 10 mL/min Same as step 1
IC Circulation Rate 100 mL/min Same as step 1
EC Inlet None N/A
EC Inlet Rate 0 mL/min Same as step 1
EC Circulation Rate 30 mL/min Same as step 1
Outlet EC Outlet Same as step 1
Rocker Stationary (0°) Same as step 1
Stop Condition IC Volume (22 mL) IC Volume (1 to 100 mL)
3. Touch
Start
.
4.
Check the status line to confirm that the task has started.
5. Verify that there are no contents left in the bag.
When the system completes the task, the home screen appears, the system changes to an idle state,
and the status line displays Idle.
Add Bag Contents
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 11-9