Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 135 / 204

Table 10-6: Step 1 Settings for Load Cells Without Circulation (continued)
Setting Factory Default Setting Options
Outlet EC Outlet N/A
Rocker In Motion (−90°, 180°, 1 sec) In Motion (−180° to 270°, 0 to 3600 sec), Stationary
(−180° to 270°)
Stop Condition Empty Bag N/A
2. Confirm the settings for step 2 shown in Table 10-7.
Table 10-7: Step 2 Settings for Load Cells Without Circulation
Setting Factory Default Setting Options
IC Inlet IC Media Reagent, IC Media, Wash, EC Media
IC Inlet Rate 50 mL/min Same as step 1
IC Circulation Rate 0 mL/min Same as step 1
EC Inlet None N/A
EC Inlet Rate 0 mL/min N/A
EC Circulation Rate 30 mL/min Same as step 1
Outlet EC Outlet N/A
Rocker In Motion (−90°, 180°, 1 sec) Same as step 1
Stop Condition IC Volume (47 mL) IC Volume (1 to 200 mL)
3.
Touch
Start
.
4. Check the status line to confirm that the task has started.
5.
Verify that there are no contents left in the bag.
When the system completes the task, the home screen appears, the system changes to an idle state,
and the status line displays Idle.
Load and Attach Tasks
10-6 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1