Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 108 / 204

Connect Sampling Coil
The purpose of this task is to attach a sampling coil accessory set to the cell expansion set after the existing
sample coil on the cell expansion set has been used.
1. Touch
Task
.
2.
Touch
Set Management
.
3. Touch
Connect Sampling Coil
.
The Setup: Connect Sampling Coil screen appears, as shown in Figure 7-13, which prompts you to
select the IC Inlet Source and enter the chase volume.
Figure 7-13: Setup: Connect Sampling Coil screen
4.
Touch the IC Inlet Source field.
A menu of IC inlet source options appears, and the IC Inlet Source field changes to black. The
available IC inlet source options for this task include IC Media, Reagent, EC Media, and Wash.
5. Select the desired IC Inlet Source from the menu.
The IC Inlet Source field displays the option you selected and changes to gray.
6. Touch the Chase Volume field.
A data entry pad appears.
7.
Enter the desired chase volume using the data entry pad.
The data entry pad displays the chase volume you entered.
8. Touch
Start
.
The Connect Sampling Coil status screen appears and includes a progress bar.
Connect Sampling Coil
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 7-13