1
TERTEC
Evolution
®
Tel.: +49 (0)461 182 8149
E-mail: [email protected]
Web: www.tertec-evolution.eu
Start by drilling a hole of 20 mm, to avoid fraying.
Drill through the half, first from below and then from above.
Remove the protective film from the underside of
the antenna, before the antenna is put into the hole.
Through thickness
Nut 0.1 mm - 250 mm
Extension 250 mm - 600 mm
The nut or extension, tighten with 5 Nm.
The cable is pulled to the Internet Modem/Router
Max 10 meters.
