User Manual for Tersus RS460H Radio v1.1
13
2.2 Software Configuration
The detailed steps of software configuration are as follows:
1) Hardware connection
Use the accessary cables listed in section 1.3 to connect the radio to the
computer following the connection in the figure below. Power on the radio
using 5V or 12V external power supply.
Figure 2.2 Hardware connection for software configuration
Table 7 Devices in Figure 2.2
No.
Device Name
1
Serial-5pin to DC JACK and DB9 male cable
2
DB9 Female to USB Type A Male converter cable
3
DC JACK male with two wires
4
2W Radio RS460H
5
410-470MHz radio whip antenna
6
Computer(Desktop/Laptop)
