Countertop RFID User Guide, REV3, 8/3/21 8
Figure 4: Back Panel
Unpacking the Device
Inspection
Before unpackaging the device, inspect for any damage that may have occurred during transit. If any
damage is present, please contact Terso Solutions Technical Support at +1 888.376.0257.
Unpacking
•
Remove the straps and remove all packaging. Gently position the device in place on the ground.
•
Remove accessories from inside the device
. Items included are a
power cable and Ethernet
cable
. Other items may also be included such as cables and bins, or other device specific items.
Proper Handling
Do not use push the handle to move the device. Always move the device with the door facing you. Carefully
roll the device into designated location leaving at least a 4 inch (in.) gap between the back of the device and
the wall.
Installation
Site
When choosing an install site, reference state and federal requirements prior to installation in a medical
setting and designate backup device to store contents if the device has an unforeseen issue.
For proper operation and maximum performance, install the device in a location which meets the following
conditions:
Correct power outlets
Device requires a grounded 120 V 10 A NEMA 5-15 outlet.
Do not connect device to a GFI
(Ground Fault Interrupt) circuit.
Do not use an extension cord
or any multi-outlet strip or plug. Using such equipment can
cause insufficient power leading to component failure.
Sturdy and level floor
Install the device on a sturdy floor to ensure proper door alignment.
Do not install on unstable floor.
This may result in user injury from device tipping.
Dry location with minimal humidity
Do not operate device outdoors.
Exposure to humidity or water may result in current
leakage or electric shock.
Never install the device in humid location
or a place where it is likely to be splashed by
water. This may result in current leakage or electric shock.
Do not install the device under water
pipes or steam pipes. This may result in current
leakage or electric shock.
Absence of flammable or corrosive gas