EDOC00082
–
RFID Mobile Case User Manual, rev 1
9
Visual Indicators
Indicators are only active when case is not in battery saving mode. After the
case has been idle for several minutes, the LEDs will be disabled to conserve
battery life.
LED Operation
Left LED (Status)
Right LED (Battery)
Color
Status
Color
Status
Green
Transmitting Data
Green
Good
Red
Communication Error
Yellow
Low
Red
Critical
Both LEDs will be off while the case is in battery saving mode. Once the case
lid has been closed, one or both LEDs may begin flashing. This indicates the
case is exiting battery saving mode. Both LEDs will turn solid when the system
is fully operational. Once the RFID scan is complete and the inventory is
transmitted to Terso, the case will enter back into battery saving mode.
Log Entry Events
All case log entry events are automatically sent to Terso Solutions. Terso
Solutions staff may contact the individual transporting the case to assist in
correcting a potential problem.
Low Battery
An event will be generated and sent to Terso when the battery passes below
the low battery threshold, which by default is 20%. The case will continue to
function as normal when in this state.
Note:
There is a fuel gauge on the battery for quick reference.
Critical Battery
An event will be generated and attempted to be sent to Terso when the battery
passes below the critical battery threshold, which by default is 10%. While in
this state, no RFID scans will be attempted. Additionally, if the battery is too
low, it may not be able to send in this event. The battery should either be
replaced or recharged to at least 50% before continued use.
Lid Open
If the lid is left open for longer than the lid open threshold time, an event will
be queued. The case will remain operational in this condition but will no longer
report real-time inventory.
